Check and Erase backplate

With the Installer app you can check and erase backplates. By using Check backplate, you can see if the backplate is already configured towards a site or not. By choosing Erase backplate, you can remove the backplate from any circuit it is a part of in the cloud.

 

Exceptional_Information_CircleInfo_Icon.svgTo check and erase backplates, you need access to the site the backplate is a part of.

 

Check backplate

Inside the Installer app menu.

  1. Press the Tools button.
  2. Choose Check backplate.
  3. Scan the NFC chip on the backplate.
  4. You will then get the information about the site, or be able to Request access if you don't have access.

 

Erase backplate

Inside the Installer app menu.

  1. Press the Tools button.
  2. Choose Erase backplate.
  3. Scan the NFC chip on the backplate.
  4. Acknowledge that you have understood what the process will do by pressing the Continue button.
  5. Press Erase another or I'm done button.

Was this article helpful?

0 out of 1 found this helpful