How do I access the charger’s WiFi interface?

In the charger's WiFi interface, you can do simple operations locally. You can change the max charging current and lock or unlock the cable.

If you are an installer and want to access the installer menu, you will have to turn the power off and on again to make the installation menu available. Accessing the menu should only be done by authorized electricians.

1. Put your smartphone in flight mode.

2. Hold the touch button on your charger until the LED strip lights up in green and you hear a confirmation tone.

   The charger has now created a local WiFi network.

3. Using your phone, connect to the charger’s WiFi network.

   The WiFi name (SSID) contains your charger’s serial number.

4. Open your phone’s web browser and enter 192.168.4.1 into the address field.
5. Log in with the PIN code located on the front of the charger.
   Need help finding your PIN code?

The local WiFi interface will automatically deactivate after 15 minutes of inactivity. This interface serves as a simple way to establish communication between the charger and your phone. The WiFi created by the charger is not connected to the internet; it functions only as a local connection point for accessing the charger’s settings while it is offline. Additionally, all software versions after v316 include Bluetooth, meaning the WiFi interface will be disabled.