Electric Vehicles (Smart Charge Points) Regulations 2021
Easee UK Ltd is subject to the Electric Vehicles (Smart Charge Points) Regulations 2021 (“the Regulations”) and provides this document in meeting the requirements of Regulation 13.
In addition, the Regulations apply to the whole value chain of selling a charge point. Therefore, it is required that a Third Party who may sell on a charge point or install a charge point issue this document as well. Regulation 13 requires the Third Party ("the seller") to provide a statement of compliance with the sale of any relevant charge point. The Easee One is a relevant charge point.
The seller,
|
Seller name |
<To be inserted> |
|
Seller address |
<To be inserted> |
declares under sole responsibility that the relevant charge point,
|
Charge point make |
Easee |
|
Charge point model |
One |
| Serial Number (Optional) |
|
|
Software version at point of sale |
37 << or above >> |
|
Compliance with Schedule 1 security requirements |
Yes |
|
Details of Demand Side Response (DSR) agreement if present |
|
|
Manufacturer name |
Easee AS |
|
Manufacturer address |
Grenseveien 19, 4313 Sandnes, Norway |
|
Date of sale |
<To be inserted> |
complies with the device-level requirements set out under the Electric Vehicles (Smart Charge Point) Regulations 2021, as detailed in the technical file. Please contact support for a copy of the technical file.
All correctly installed Easee hardware is covered by a 3-year warranty.
If you have any concerns regarding the security of your chargepoint or you need to report any issues regarding the security and vulnerability, please email UKCyber@easee.com with your questions.
Please go to https://support.easee.com/hc/en-gb and click on the National Requirements section for guidance on how to securely set up and check your chargepoint.
Please email UKCyber@easee.com to ask for your personal data to be deleted. The Customer Support team will respond with an acknowledgement this has been done.
|
Signature |
|
|
|
Name |
<To be inserted> | |
|
Date |
<To be inserted> |
|
Please contact support for a copy of this file.