When integrating the Easee Equalizer with meters that conform to Dutch Smart Meter Requirements (DSMR), it is important to know which version of the DSMR the meter supports, and whether you will charge with 1-phase or 3-phase.
Easee Equalizer works with these DSMR:
- DSMR v4.0 and higher is fully supported.
- DSMR v2.2 is supported on 1-phase meters. In this case, an external power source is required. An alternate possibility is to use an active splitter.
- DSMR v2.2 on 3-phase meters works on a case-by-case basis. The ISKRA MT382, for example, does not send any information about load per phase and would not work with Easee Equalizer.