The fuse often goes off while charging. What is wrong?

Check that the installer has put the correct fuse in the charger.

To be able to open the installer's menu, you first need to pull the fuse. If you do not, the WiFi interface is locked to only show the "end users" interface. When that´s done follow these steps:

1. Using your app, connect to the charger via Bluetooth.
   If your charger is not already connected via Bluetooth, see Using Bluetooth.
2. Once connected, you can change the Max charge current.
3. Set the configured fuse value to what's seen on the fuse in the fusebox.
   We recommend having the "Fuse Current" value lower than the real fuse, depending on the fuse model. Some are more sensitive than others.

   We recommend setting Max charge current to 80% of your fuse value.