Easee Grid and smart charging (Norway)

  • Updated

Overview

With Easee Grid, your charger helps keep the power grid in balance when it needs it most. With smart charging, your car charges in the cheapest hours, based on your electricity contract. You set this up in one guided flow in the Easee app.

This article applies to Norway only. We are rolling this out in phases, so for now only invited users have access.

  • Easee Grid: When the power grid needs help to stay in balance, Easee briefly adjusts your charging. You stay in control and can charge straight away whenever you need to.
  • Smart charging: Easee gets the electricity price from your energy provider. You choose when the car must be ready, or the highest price you want to pay. The charger picks the cheapest hours.

Before you start

Invited users only, for now. If you don't see Easee Grid or the new smart charging after updating the app, you haven't been invited yet. They will appear in the app when it's your turn.

Check that you have the following:

  • Easee app version 3.1.2 or later. Update the app in the App Store or Google Play before you start.
  • A charger on a site in Norway, with Easee as the operator.
  • Owner or admin rights on the site. Other users can view the charging schedule but not change it.
  • A charger that is online.
  • Your meter ID (målepunkt-ID), or a recent electricity bill as a PDF. See "How to find your meter ID" below.

How to enable Easee Grid

When you open the app after updating, you see the Get more out of your charger screen. It shows the three parts: Easee Grid, energy tariff and smart charging.

  1. Tap Get started.
  2. On the Avoid power grid peaks screen, tick the box to agree, then tap the arrow to continue.
  3. Enter your meter ID in one of two ways:
    • Type the last 8 digits. The first 10 digits are filled in for you.
    • Tap Choose PDF and upload a recent electricity bill. The app reads your address, electricity provider and meter ID from the bill.
  4. Tap Continue.
  5. Confirm your address. Search for it and select it from the list. Check the street, postcode, city and country, then tap Confirm.
  6. Read the Easee Grid terms. Tick the box and tap Participate.

Easee Grid is now on. The app takes you on to set up your energy tariff and smart charging.

How to find your meter ID

Your meter ID (målepunkt-ID) is an 18-digit number that identifies your electricity meter. Every electricity meter in Norway has its own ID.

  • On your electricity bill: The number is usually on the bill from your electricity provider or grid company, labelled "Målepunkt-ID".
  • At Elhub: Log in at minside.elhub.no to see your meter ID.
  • In the app: Tap Where to find this number? on the meter ID screen. From there you can also open Elhub directly.

If you upload your electricity bill as a PDF, it is only read on your phone to pick out your address, electricity provider and meter ID. It is discarded straight after and is not stored.

Set up your energy tariff

After Easee Grid, you connect the charger to your electricity contract. This tells the charger what electricity costs hour by hour. The tariff applies to the whole site, so all chargers on the site follow the same price.

  1. On the Charge smarter, pay less screen, read how smart charging works. Tick the box to accept the terms and tap the arrow.
  2. Confirm the site address.
  3. Choose your electricity provider. Use the search field if you don't see it. If your provider isn't listed, tap Skip and enter your tariff manually.
  4. Choose your energy plan from the list, for example a spot price plan.
  5. Check the summary. It shows your electricity provider, plan, grid company, grid tariff, and taxes and fees. Tap Confirm.
  6. When you see the All set screen, your tariff is connected to the site.

The site's charging price updates automatically from your tariff. You can find it under Site settings → Charging price.

Use smart charging

Smart charging selects the cheapest charging hours for you, based on the electricity price. You can set it up in one of two ways:

Option You set The charger
Charging hours and Ready by How many hours the car needs to charge, and when it must be ready Charges in the cheapest hours before your Ready by time
Price cap The highest price per kWh you want to pay Charges only in hours where the price is at or below your cap
  1. Tap Schedule on the charger card and choose Smart charging.
  2. Choose one of the two options.
  3. For Charging hours and Ready by: set the minimum charging hours and the time the car must be ready, for example 07:00.
  4. Add Price cap (optional): enter your maximum price per kWh. The price from your provider is not used as the cap automatically.
  5. Tap Enable.

The timeline shows the electricity price hour by hour. The hours the charger plans to charge in are highlighted. The charger card shows when the next charging session starts.

Charge straight away

You can always charge straight away, whatever the schedule, and even during an Easee Grid pause. Tap the charge button in the middle of the charger card.

Turn off smart charging

Tap Schedule on the charger card and turn the schedule off. Your settings are saved, so you can turn it back on later.

If you wait or skip

You can set up Easee Grid and smart charging whenever it suits you.

You tap What happens
Later on the start screen The setup closes. A button at the top of the app reminds you about Easee Grid until you tap Not interested.
Not interested The button at the top of the app goes away. You can still start setup from Schedule or the site card.
Skip on the meter ID screen Easee Grid is not turned on. You go straight on to setting up your energy tariff.

You can find the setup again here:

  • The button at the top of the app (shown until you tap Not interested)
  • Schedule → Smart charging on the charger card
  • The Easee Grid and Charging price tiles on the site card
  • Site settings

Already turned on Easee Grid but haven't set up your energy tariff? The app then starts directly at the energy tariff step.

Check status or turn off Easee Grid

You can check the status of Easee Grid, or turn it off, at any time.

  1. Swipe down on the charger card to open the site card.
  2. Tap the Easee Grid tile. Here you can see that Easee Grid is on.
  3. To turn it off, tap the three dots in the top right and choose Disable Easee Grid.
  4. Confirm with Yes.

To join again later, tap the Easee Grid tile and choose Enable.

Questions and answers

I can't see Easee Grid or the new smart charging in the app. We are rolling this out in phases, and for now only invited users have access. If you have been invited, check that you have Easee app version 3.1.2 or later. Easee Grid is only available in Norway, on sites with Easee as the operator. Only the site owner or an admin can set it up.

I already use smart charging with my tariff connected. Will I get the new version? Yes. Your setup will be moved to the new version in a later phase of the rollout. You don't need to do anything.

What if Easee can't get the latest prices from my provider? Smart charging falls back to a fixed price until the latest prices are available again.

What happens to my charging when Easee Grid is on? When the grid needs help to stay in balance, your charging may be adjusted or paused for up to 1 hour. Your car still charges according to your schedule.

Can I charge straight away even when Easee Grid or smart charging is on? Yes. Tap the charge button in the middle of the charger card. This also overrides an Easee Grid pause.

Why do you need my meter ID? The meter ID links your charger to the right electricity meter and grid area. Without it, we can't turn on Easee Grid.

I have several chargers on the same site. The energy tariff applies to the whole site. All chargers on the site follow the same electricity price.

Can other users on the site change the schedule? No. Other users can view the charging schedule, but only the owner or an admin can change it.

My car didn't charge overnight. What went wrong? Check that smart charging was enabled and that the charging hours, Ready by time or price cap are set correctly. Also check that the car doesn't have its own charging schedule or isn't connected to another service. Some cars go into sleep mode and must be awake to start charging.

Does this work if I have another operator, such as Tibber? No. Easee Grid and smart charging need Easee as the operator on the site.

Was this article helpful?

0 out of 0 found this helpful