You will have to add a circuit to the site. The circuit has basic information like name and fuse size. If you have a big charging site, you might have multiple circuits. The circuits distinguish what chargers are on which fuse. Keep this in mind when you are adding backplates later in the process.

You do not need an internet connection to do this.

1. On the site's Site structure page press Add another circuit.
2. Input the Circuit fuse and press the arrow to continue.
   The Circuit data is displayed.
3. Review the Fuse, Rated current, and Name of the circuit.
   Press the value to change it. Press the arrow to continue.
4. Enter the WiFi network and password. If there is no WiFi, press No WiFi available to complete the installation of backplates on the circuitusing NFC or Bluetooth. You will need to scan an installed backplate (NFC) or charger (Bluetooth) on the circuit.
5. Enter the Position Name. This helps identify the charger location, if needed.

A the end of the installation, you can press to Add another charger or backplate, or press I'm done to finish.

An SSID password can be up to 31 characters. The characters dot (.), slash (/), backslash (\) and hyphen (-) are not usable.

You are now done creating the circuit and can continue to Adding backplates to a circuit.